1·Have spray plating production lines and production lines.
有电镀生产流水线和喷塑生产流水线。
2·Counter-flow spray technique for the treatment of the rinsing water containing pyrophosphates in Cu- Sn-Ni alloy plating is described.
电镀焦磷酸盐铜锡镍废水由“常流水”清洗方式改为反喷淋清洗方式。
3·The corrosion resistance of deposits and covering power of the plating bath were tested respectively by neutral salt spray test and inner-pole method, and the hardness of deposits was also measured.
采用中性盐雾试验测定了镀层的耐蚀性，采用内孔法测定了镀液的覆盖能力，并测定了镀层的硬度。
4·The salt spray test results of piston rods with different surface qualities showed that superfinish process of piston rods before plating can improve corrosion-resistance of piston rods significantly.
不同表面质量的连杆盐雾试验对比表明：镀前对汽车减振器连杆进行表面超精加工可显著提高连杆的耐蚀性。
5·The ET-III-W can be used directly on the plating tank to remove rinse spray water and fume scrubber water.
可直接用于对电镀槽，以消除冲洗洒水和烟气洗涤水。
6·Technological process of regeneration of seal rib and profile on tri-lobe Roots blower made in Germany is introduced comprehensively using the technique of electric brush plating & hot spray welding.
介绍了综合运用电刷镀、热喷焊技术对德国制造的三叶罗茨鼓风机密封筋、型面进行“再生”的工艺过程。
7·Various performance tests (neutral salt spray, metallic coating binding force) about rhodium plating on different substrate metal material were also studied.
同时通过中性盐雾实验、镀层结合力测试，研究和比较了不同基材上铑镀层的性能。
8·Compared with the pollution of the traditional plating or spray coating method to the environment, the vacuum sputtering is environmental process and accords with ROHS standard completely.
相对于传统水电镀或喷涂方式对环境的污染，真空溅射是环保制程，完全符合ROHS标准。
9·The method adopts one or more of casting, hot dip plating, welding, rolling, hot pressing, electroplating and hot spray coating.
本发明可以采用铸造、热浸镀、焊接、轧制、热压、电镀、热喷涂等一种或多种方法生产。
10·Thermal spray coating has been widely used in aerospace, metallurgy, packaging, printing and paper-making industries instead of traditional plating technique.
指出热喷涂技术已经在航空、冶金、包装印刷和造纸等工业领域部分替代了电镀硬铬工艺；